PoolPlanner

14 × 28 ft Figure 8

pool plan

Family pool

A full family pool: a shallow end where kids stand and games happen, a proper deep end for diving-free swimming, and enough length that two people can swim without negotiating. This is the most-built size class in private gardens for a reason.

The figure 8 pinches its waist between two round lobes, giving a soft, playful outline with genuinely separate zones: a bigger lobe for swimming and splashing, a smaller one for steps, kids or a spa corner. The narrow waist is also the natural place for a handrail or a divider net.

Open in the 3D designer

Free · no signup · runs in your browser

8.5 m4.3 m

14 × 28 ft — shown to scale

The numbers, computed

Water surface
234 sq ft
Water volume
7,979 gal (33.3 tons)
Perimeter
63′ 9″
Depth
3′ 11″–5′ 11″
Excavation approx.
62 cu yd
Fill time (garden tap)
20 hours
Skimmers needed
1×
Heat pump size
38,000 BTU/h

Figures are computed from the sampled pool outline and the plan's depths — the same geometry the 3D designer uses. Excavation includes shell and working allowance; your site conditions may differ.

Questions about this plan

How much water does a 14 × 28 ft pool hold?
About 7,979 gal (33.3 tons of water) at 3′ 11″–5′ 11″ depth — computed from the actual pool outline, not a rule of thumb.
How long does it take to fill?
Roughly 20 hours from a standard garden tap (~6.6 GPM). A water delivery service fills it in a few hours.
Is this size right for my garden?
The water surface is 234 sq ft; plan roughly 1.5–2× that footprint including the surrounding deck. Open the plan in the designer and set your own deck margins to see the full footprint.
Can I change the depth or edge type?
Yes — open the plan in the designer and adjust depths, edge system (skimmer, deck-level overflow or raised), finishes and accessories freely.

Similar pool plans

Go on — put a pool in your garden.

Open the designer and see it in 3D tonight. Free, no signup.

Start designing — it's free

Free · no signup · runs in your browser