16 x 32 ft Grecian pool
pool plan
A full family pool: a shallow end where kids stand and games happen, a proper deep end for diving-free swimming, and enough length that two people can swim without negotiating. This is the most-built size class in private gardens for a reason.
The Grecian pool clips the rectangle's corners at 45°, giving an octagonal outline that reads formal and deliberate without a single curve. It keeps nearly all the rectangle's swim length, and the angled corners make elegant seats for steps, benches or planters at the pool's edge.
Open in the 3D designerFree · no signup · runs in your browser
16 × 32 ft — shown to scale
The numbers, computed
- Water surface
- 483 sq ft
- Water volume
- 16,113 gal (67.2 tons)
- Perimeter
- 87′
- Depth
- 3′ 11″–5′ 11″
- Excavation approx.
- 134 cu yd
- Fill time (garden tap)
- 41 hours
- Skimmers needed
- 2×
- Heat pump size
- 75,000 BTU/h
Figures are computed from the sampled pool outline and the plan's depths — the same geometry the 3D designer uses. Excavation includes shell and working allowance; your site conditions may differ.
Also in metric sizes: 10 × 5 m
What it costs to build
A rough installed-cost range per construction type, at this size — the pool itself, with basic coping. Not a quote.
| Construction | Installed cost | Note |
|---|---|---|
| Vinyl liner | $44,000–$66,000 | Fastest and least expensive; the liner is replaced every 8–12 years. |
| Fiberglass | $59,000–$86,000 | One-piece shell, quick install; limited to sizes and shapes a mould exists for. |
| Concrete (gunite) | $69,000–$110,000 | Built to any shape or size; the slowest build and the most upkeep. |
Rough 2026 estimates for the pool installed with basic coping — excavation, shell and basic equipment. Excludes deck, fencing, landscaping, heating and permits, all of which vary by site and by builder; get real bids before budgeting from these figures.
Questions about this plan
- How much water does the 16 × 32 ft pool hold?
- About 16,113 gal (67.2 tons of water) at 3′ 11″–5′ 11″ depth — computed from the actual pool outline, not a rule of thumb.
- How long does it take to fill?
- Roughly 41 hours from a standard garden tap (~6.6 GPM). A water delivery service fills it in a few hours.
- Is this size right for my garden?
- The water surface is 483 sq ft; plan roughly 1.5–2× that footprint including the surrounding deck. Open the plan in the designer and set your own deck margins to see the full footprint.
- Can I change the depth or edge type?
- Yes — open the plan in the designer and adjust depths, edge system (skimmer, deck-level overflow or raised), finishes and accessories freely.
- How much does the 16 × 32 ft Grecian pool cost to build?
- Roughly $44,000 to $110,000 installed at this size, depending on construction type — before deck, fence, landscaping, heating or permits. See the cost table above for the range per type.
Similar pool plans
16 × 36 ft · Grecian
Estate pool19,510 gal · 547 sq ft
16 × 32 ft · Rectangular
Family pool17,200 gal · 512 sq ft
16 × 32 ft · Rounded rectangle
Family pool16,611 gal · 502 sq ft
16 × 32 ft · Oval
Family pool13,532 gal · 401 sq ft
16 × 32 ft · Roman
Family pool15,239 gal · 457 sq ft
16 × 32 ft · L-shape
Family pool13,692 gal · 415 sq ft
Go on — put a pool in your garden.
Open the designer and see it in 3D tonight. Free, no signup.
Start designing — it's freeFree · no signup · runs in your browser

