16 x 32 ft oval pool
pool plan
A full family pool: a shallow end where kids stand and games happen, a proper deep end for diving-free swimming, and enough length that two people can swim without negotiating. This is the most-built size class in private gardens for a reason.
The oval trades corners for one continuous curve. It sits beautifully in planted, informal gardens and among period houses, and the long axis still gives a proper swimming line. Circulation is excellent because there are no corners at all for water to stall in.
Open in the 3D designerFree · no signup · runs in your browser
16 × 32 ft — shown to scale
The numbers, computed
- Water surface
- 401 sq ft
- Water volume
- 13,532 gal (56.5 tons)
- Perimeter
- 77′ 5″
- Depth
- 3′ 11″–5′ 11″
- Excavation approx.
- 112 cu yd
- Fill time (garden tap)
- 34 hours
- Skimmers needed
- 2×
- Heat pump size
- 61,000 BTU/h
Figures are computed from the sampled pool outline and the plan's depths — the same geometry the 3D designer uses. Excavation includes shell and working allowance; your site conditions may differ.
Also in metric sizes: 10 × 5 m
What it costs to build
A rough installed-cost range per construction type, at this size — the pool itself, with basic coping. Not a quote.
| Construction | Installed cost | Note |
|---|---|---|
| Vinyl liner | $40,000–$60,000 | Fastest and least expensive; the liner is replaced every 8–12 years. |
| Fiberglass | $53,000–$77,000 | One-piece shell, quick install; limited to sizes and shapes a mould exists for. |
| Concrete (gunite) | $63,000–$100,000 | Built to any shape or size; the slowest build and the most upkeep. |
Rough 2026 estimates for the pool installed with basic coping — excavation, shell and basic equipment. Excludes deck, fencing, landscaping, heating and permits, all of which vary by site and by builder; get real bids before budgeting from these figures.
Questions about this plan
- How much water does the 16 × 32 ft pool hold?
- About 13,532 gal (56.5 tons of water) at 3′ 11″–5′ 11″ depth — computed from the actual pool outline, not a rule of thumb.
- How long does it take to fill?
- Roughly 34 hours from a standard garden tap (~6.6 GPM). A water delivery service fills it in a few hours.
- Is this size right for my garden?
- The water surface is 401 sq ft; plan roughly 1.5–2× that footprint including the surrounding deck. Open the plan in the designer and set your own deck margins to see the full footprint.
- Can I change the depth or edge type?
- Yes — open the plan in the designer and adjust depths, edge system (skimmer, deck-level overflow or raised), finishes and accessories freely.
- How much does the 16 × 32 ft oval pool cost to build?
- Roughly $40,000 to $100,000 installed at this size, depending on construction type — before deck, fence, landscaping, heating or permits. See the cost table above for the range per type.
Similar pool plans
15 × 30 ft · Oval
Family pool11,722 gal · 352 sq ft
16 × 32 ft · Rectangular
Family pool17,200 gal · 512 sq ft
16 × 32 ft · Rounded rectangle
Family pool16,611 gal · 502 sq ft
16 × 32 ft · Roman
Family pool15,239 gal · 457 sq ft
16 × 32 ft · Grecian
Family pool16,113 gal · 483 sq ft
16 × 32 ft · L-shape
Family pool13,692 gal · 415 sq ft
Go on — put a pool in your garden.
Open the designer and see it in 3D tonight. Free, no signup.
Start designing — it's freeFree · no signup · runs in your browser