7 × 4 m Figure 8
pool plan
A full family pool: a shallow end where kids stand and games happen, a proper deep end for diving-free swimming, and enough length that two people can swim without negotiating. This is the most-built size class in private gardens for a reason.
The figure 8 pinches its waist between two round lobes, giving a soft, playful outline with genuinely separate zones: a bigger lobe for swimming and splashing, a smaller one for steps, kids or a spa corner. The narrow waist is also the natural place for a handrail or a divider net.
Open in the 3D designerFree · no signup · runs in your browser
Plan view, 7 × 4 m — drawn to scale
The numbers, computed
- Water surface
- 19.1 m²
- Water volume
- 27.5 m³ (27,538 L)
- Perimeter
- 18.2 m
- Depth
- 1.2–1.8 m
- Excavation approx.
- 43 m³
- Fill time (garden tap)
- 18 hours
- Skimmers needed
- 1×
- Heat pump size
- 10 kW
Figures are computed from the sampled pool outline and the plan's depths — the same geometry the 3D designer uses. Excavation includes shell and working allowance; your site conditions may differ.
Questions about this plan
- How much water does a 7 × 4 m pool hold?
- About 27.5 m³ (27.5 tonnes of water) at 1.2–1.8 m depth — computed from the actual pool outline, not a rule of thumb.
- How long does it take to fill?
- Roughly 18 hours from a standard garden tap (~1.5 m³/h). A water delivery service fills it in a few hours.
- Is this size right for my garden?
- The water surface is 19.1 m²; plan roughly 1.5–2× that footprint including the surrounding deck. Open the plan in the designer and set your own deck margins to see the full footprint.
- Can I change the depth or edge type?
- Yes — open the plan in the designer and adjust depths, edge system (skimmer, deck-level overflow or raised), finishes and accessories freely.
Similar pool plans
Go on — put a pool in your garden.
Open the designer and see it in 3D tonight. Free, no signup, and your builder gets a blueprint.
Start designing — it's freeFree · no signup · runs in your browser