10 x 5 m rectangular pool
pool plan
A full family pool: a shallow end where kids stand and games happen, a proper deep end for diving-free swimming, and enough length that two people can swim without negotiating. This is the most-built size class in private gardens for a reason.
The rectangle is the default for a reason: it gives you the most swimmable water for a given footprint, plays well with modern architecture and lap swimming, and makes covers, solar blankets and automatic cleaners simple. Straight walls also keep formwork and tiling straightforward, which builders appreciate.
Open in the 3D designerFree · no signup · runs in your browser
10 × 5 m — shown to scale
The numbers, computed
- Water surface
- 538 sq ft
- Water volume
- 18,080 gal (75.4 tons)
- Perimeter
- 98′ 5″
- Depth
- 3′ 11″–5′ 11″
- Excavation approx.
- 150 cu yd
- Fill time (garden tap)
- 46 hours
- Skimmers needed
- 2×
- Heat pump size
- 82,000 BTU/h
Figures are computed from the sampled pool outline and the plan's depths — the same geometry the 3D designer uses. Excavation includes shell and working allowance; your site conditions may differ.
What it costs to build
A rough installed-cost range per construction type, at this size — the pool itself, with basic coping. Not a quote.
| Construction | Installed cost | Note |
|---|---|---|
| Liner or membrane | €39,000–€67,000 | Over a block or concrete shell; the least expensive route to any shape. |
| Tiled concrete | €60,000–€100,000 | A poured shell finished in tile; built to any shape, the most durable finish. |
| One-piece fiberglass | Not made at this size | Fastest to install; limited to sizes and shapes a mould exists for. |
Rough 2026 estimates for the pool installed with basic coping — excavation, shell and basic equipment. Excludes deck, fencing, landscaping, heating and permits, all of which vary by site and by builder; get real bids before budgeting from these figures.
Questions about this plan
- How much water does the 10 × 5 m pool hold?
- About 18,080 gal (75.4 tons of water) at 3′ 11″–5′ 11″ depth — computed from the actual pool outline, not a rule of thumb.
- How long does it take to fill?
- Roughly 46 hours from a standard garden tap (~6.6 GPM). A water delivery service fills it in a few hours.
- Is this size right for my garden?
- The water surface is 538 sq ft; plan roughly 1.5–2× that footprint including the surrounding deck. Open the plan in the designer and set your own deck margins to see the full footprint.
- Can I change the depth or edge type?
- Yes — open the plan in the designer and adjust depths, edge system (skimmer, deck-level overflow or raised), finishes and accessories freely.
- How much does the 10 × 5 m rectangular pool cost to build?
- Roughly €39,000 to €100,000 installed at this size, depending on construction type — before deck, fence, landscaping, heating or permits. See the cost table above for the range per type.
Similar pool plans
12 × 4 m · Rectangular
Lap pool15,470 gal · 517 sq ft
11 × 5 m · Rectangular
Estate pool21,316 gal · 592 sq ft
10 × 5 m · Rounded rectangle
Family pool17,461 gal · 528 sq ft
10 × 5 m · Oval
Family pool14,267 gal · 421 sq ft
10 × 5 m · Grecian
Family pool16,916 gal · 507 sq ft
10 × 5 m · Kidney
Family pool10,408 gal · 306 sq ft
Go on — put a pool in your garden.
Open the designer and see it in 3D tonight. Free, no signup.
Start designing — it's freeFree · no signup · runs in your browser